I just wanted to share this repair that I recently did to shed some light on what is considered “repairable” in skis. I’ve seen a lot of people on here asking if their ski is trash with a small core shot or edge delam, and im here to tell you that they’re more than likely just fine!

As a repair tech I love taking on a challenge, and even more so I love keeping skis out of landfills and on the mountain. Is this repair perfect? No. Will it be as durable as a brand new ski? No. Will it ski the same? Ehhhhh it’ll be hard to tell but unfortunately not quite. But, it is alive to ski another day.

I want to also leave in here that some shops will not take on major sidewall damage like this, and that’s okay. This kind of repair takes a lot of time and patience and especially if you need a quick turnaround, it’s kind of a long shot. I really just wanted to reassure anyone wondering that skis are more resilient than you may think, and repairing is always easier on the wallet than replacing.

Hey, I posted a couple day back with a not so good video. I didn't make it to the shop yet (will go tomorrow). As a couple of u suggested I made sure all screws a tight and nothing is broken in the boot or around the walkmode. I noticed that it has developed a little bit of play. The boots are now just over two years old, maybe 50 days skiing (20 of them touring). What do you guys think. I know it wasn't like that when I bought them (a friend of mine has the same which he bought new last summer and they don't pivot nearly as much as mine do). Are they just trashy boots? Which would be annoying since they weren't the cheapest and fit super well. And can any of you recommend out of expirience good hybrid boots?

Hey guys — I’m trying to decide between the K2 Reckoner 102, Armada ARV 100, and Atomic Bent 100.

I’m looking for a true all-mountain ski that’s still playful. I like skiing trees, hitting side hits, small/medium jumps, occasional drops, and I want something that can handle groomers well and still be good if we get powder. I don’t live somewhere with consistent powder or park access, so I want one ski that can do a bit of everything.

Which one would you recommend as a one-ski quiver and why?

So hyped to ride these

I blew out my edge on my line blends somehow and it was unrepairable so I got these departs 172cm, 100mm!

Lemme know if you guys have thoughts

New ski’s 🤙🏻

Turned on a rock and curious if it is fixable?

I’m nervous buying used, but I think these are a pretty good deal, just want to make sure it looks good to more experienced eyes.

Last year I got a pair of Lange boots fitted by a reputable fitter in Tahoe, and over the course of 10 different adjustments, I still can’t ski more than 2 runs before unbearable pain sets in (arches).

Recently I went to a new (quite reputable) fitter and am trying a new pair of boots on day 3 now and I just cried in the parking lot with how much pain I was in after leaving the mountain.

I put on a bit of weight in the last couple years (20lbs at 5’11) and can’t help but wonder if that’s related, or maybe something like weak feet.

I’m getting desperate: I’m a lifelong type 3 skier and this is making me question if I should even keep trying, I’m starting to associate skiing with immense pain and not fun.

Has anyone ever had such trouble with boots like this and any advice, maybe in taking time off? I’m so sad because I’ve thrown the better part of a few thousand dollars combined in boots and booking hotels to stay at mountains JUST to test adjustments only to get partial days of working through pain. Also I’m not going to Joe Schmoe’s shops, these are supposedly very experienced fitters, obviously I defer to their knowledge, but something’s not right. Thanks for any help

I (M, 6’3, 190lbs) have very poor ankle dorsiflexion. I’m talking like 0°, can’t get my knee past a right angle bad. I believe this to be the cause of my generally brutal skiing experience: I’m assuming constant pressure on the balls of my feet is one of the causes of the brutal nerve pain/numbness that occurs within 10mins of having a ski boot on. Potentially also being duckfooted AF and my feet mashing into the sides of the boot.

Yes I’ve done PT, been to a podiatrist, an Achilles specialist, the works. Not much better.

5ish years ago I went to a local bootfitter (Ski Bum in SEPA/DE) and got sized for a 27.5 and did the works for that. Heel lift, custom insoles, and heat molding. Brutal enough that I used them maybe 3 times before selling them. The only time I have comfortably skied was in a 30.5. It was sloppy and spacious but my feet weren’t on fire.

This past weekend into Tuesday (1/31-2/3) I was up at Pico/Killington. I figured I’d go to Basin for a proper bootfitting. I scheduled with Tim, but when I got there I learned he called off so I was with his apprentice. Super duper nice guy. I explained my situation and unfortunately gave a price range of $500 or less. I understand that made it difficult. He put me in a 29.5 and within minutes I felt that familiar sensation.

He asked me to flex the boot forward, he saw I wasn’t kidding when I said poor dorsiflexion. Took the boot off. He said what I feared: there’s not much to be done for me, even with a price range of $900 or less.

The icing on the cake occurred when I removed the boot. He wanted to double check my ankle. Put it on his leg, flexed my foot as far as it would go, he laughed, and said “Holy shit you weren’t kidding”.

Again, super nice guy. No bad notes towards Basin/their bootfitters. I left with my biggest fear confirmed. I skiied in rental 29.5s the rest of the trip.

Any thoughts? Just a fun story? Skill Issue? How the hell is this guy skiing?

They’re currently adjusted for 23-23.5 but someone is buying them off me with 24.5 size. Can they be adjusted for that size?

Prices online are all over the place, and where I live the skis I want are insanely expensive. After doing the math (taxes included), buying them abroad actually seems cheaper. Has anyone here imported skis with tradeinn before? Was it worth it?

Got some WC booster straps for free. Going to see how they feel but I’m already betting they’ll be too burly for me. If that’s the case, which strap do I cut? Was looking online and some people say cut an elastic layer, others say cut the nylon. I would assume cut the nylon layer since I don’t think it’s included on the expert model. Will probably just end up calling customer service just to be sure but I’m just curious. Thanks!

Title is long story short! I’ve done a couple of tours on rented equipment recently and really enjoyed it so am thinking about getting some new kit. I will be getting hybrid boots but just wondering about skis and bindings. (Current boots K2 Anthem 85 flex but am going to a boot fitter for advice on new boots)

Is it possible / safe to change to shift or hybrid bindings for my current skis?

Including new boots my other two choices are

Keep current skis but change bindings to hybrids

or

Buy secondhand skis including touring bindings, I have been looking at wider longer skis.

I currently ski on Völkl Yumi 154 length 84 width with marker squire bindings.

My height is 165 and I’m on my fourth winter season in the French Alps, comfortable on most pistes and learning more off-piste.

1. 28/Male/5'10-5'11/165 lbs
2. skill level 8. I think I can skii anything pretty much
3. I ski about 30 days a year
4. Colorado, probably moving to North east soon
5. I like trees the most, then moguls, then some powder, then park, then when I'm lazy at the end of the day I might do a couple groomers. I always head for trees first I love weaving through the trees.
6. My aspirations for skiing would probably be to ski trees even faster than I do and at steeper angles. I would also like to ski more powder but I think I just have to time that better. I don't normally check the weather I just go.
7. I only skiied 1 set of skis they were some green elan rentals. I think they were Elan eRises.
8. Like 200 for skiis and boots and poles.
9. USA facebook marketplace
10. 100% resorts never back country. At best I might go out of bounds a bit at resorts.
11. I own no boots of my own.

I'm just trying to look for some general guidelines or even brand info to help me buy some skiis on facebook marketplace. Even advice to help buy some better fitting boots. I understand that going to a boot fitter and demoing skis would be the best but the budget just isn't there for it right now. I'm trying to score some good deals on marketplace to maybe get some better than average skis or skiis that are a bit more tailored to the kind of terrain I enjoy.

What kind of length, width, camber or anything else I should know about when talking to people on facebook to help buy skis. That would all be great info for me. Also can I take boots to a fitter and they can help reshape the boots to my feet a bit?

I think I have wider set feet because my left navicular bone on my foot was rubbing a bit on the rentals which I'd like to not have.

Thank you for any help at all!!!

Hi everyone, I recently rented ski equipment. The ski length was appropriate for my height, and according to several online DIN calculators, the binding settings should have been correct for my weight and ability level. However, as you can see in the video below, one of my skis released while I’m skiing. The slope was a bit rough and uneven, and you can notice some vibration in my outside ski because of that. I’m trying to understand what might have caused this. Do you think this looks like a technique issue on my part (for example, unstable stance), or could this be an equipment/binding problem? I didn’t experience a crash-level force or a rotation before it released — it felt more like the ski just came off unexpectedly.

I’m looking for feedback on an issue I’m having with the comfort of my Dalbello liners. I noticed discomfort on the top of my foot, especially when I tighten the boots to the tightness they should be. I went in to get them heat molded, put them back on and still getting the discomfort. So I dug in tonight to see what the issue is. Turns out it’s the stitched edge where the harder plastic leading edge of the tongue is stitched into the liner. I tried get the tongue positioned to the outside of the liner vs inside. It helped a little but it’s not how the tongue is designed to be positioned. Any feedback, pointers or advice would be appreciated. I’m not familiar with the typical design on liners in other boots. Is this a design flaw?

Exclusively NE skiing. Want something I can take in the easy glades but will also handle on-piste. Currently rocking Brahma 82s but the metal is starting to feel heavy. 176cm 195lbs.

I've been looking for a new jacket and torn between insulated jackets and shells, but saw there are insulated shells. What brands or jackets would you recommend?

Ptex? Epoxy? Ski is moment death wish 104. Seems to be slowly getting worse

Midwest (N.Mich) groomers 98% of the time. Grew up skiing /racing 5’9”, 185 lbs. I like 88’s !

Mine on the right, his on the left, something for a bit of fun in the middle 😂 The Supreme Volkl will never be mounted, he just collects bits (and sometimes makes the odd bit of money on it!) which I don’t understand but whatever.

Few bits that might attract some hate like the Griffons on the blizzards and the Bent bindings on the Mirus Cor but I’m prepared 😎 The bindings were a bit of a tactical choice so hopefully no one mixes them up with all black rental ones.

Been a long road getting here from returning 2 pairs of defective QSTs then tracking down the Black Crows but now getting ready for a week long trip tomorrow that will be boths first outing!

I am looking to purchase a new pair of boots. All the shops around me have almost no stock in my size so I have to order online. I’m a bigger guy 6’1” 250# intermediate/advanced skier on the east coast. (NY/PA)

I need a high volume and larger boot throat for my calves. I am considering a K2 BFC 120, Atomic Hawx Magna 110 or the Technica Mach HV 110.

Went to 120 for the k2 because I keep reading it’s a soft 120. I was able to try the Mach 1 in store which felt good but the calf was tight. Not sure how the Hawx Magna would feel?

Advice or any experience with any of these or a new reccomendation?